|
Deck Solutions
|
Fastener Solutions
|
Acoustical Solutions
|
|
|
Driving wood-to-wood screws and deck screws can be a lot of work and a challenge especially when driving into harder materials. Anyone who has used wood screws has had experience with strip-outs, popped heads and screws that don’t seat flush. Grabber developed the new UltraPro screws to help take the hassle out of driving screws so you can concentrate on the job.
Specifications:
Gauge: #8
Length: 1-1/4-in
Head Type: Flat Scavenger (spiral)
Recess Type: LOX 2
Thread Type: UltraCut Thread
Point Type: QuickGrab™
Coating: Yellow Zinc
The reasons why UltraPro is the BEST wood screw you will ever use:
- LOX® Recess precision fit means the bit will stay engaged.
- QuickGrab™ point
- Type 17 drill point
- UltraCut™ threads
- DrawTite™ threads
- Scavenger® II self-countersinking spiral head
Installation Guidelines:
Use a standard screwgun with a depth-sensitive nose piece, drill or impact driver. Suggested screwgun specification for optimal performance – 4 amps minimum and 2500 RPM.
- The flat head is fully seated when the head is flush with the work surface.
- Overdriving may result in failure of the fastener or strip out of the
- work surface.
- For wood to wood connections, minimum penetration should be 7 diameters (e.g. 1-1/4” for #8 fastener)
All GRABBER® screw products are manufactured in facilities that are ISO 9001 certified and approved. 
|
|