Attaches sheathing, insulation board, wood, etc. wood. Standard bugle head. Superior GrabberGard exterior grade coating provides additional corrosion protection.
Head Type: Bugle
Recess Type: #2 Phillips
Thread Type: Single lead
Coating: GrabberGard® superior corrosion protection.
Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and 2500 RPM.
- The Bugle head is fully seated when the head is flush with the work surface.
- Overdriving may result in failure of the fastener or strip out of the
- work surface.
- For wood to wood connections, minimum penetration should be 7 diameters (e.g. 1-1/4” for #8 fastener)
All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. The fasteners comply with ASTM C1002, as referenced in ICCES report ER-5280 are approved for use in structures governed by the International Building Code 2006, 2009, 2012, International Residential Building Code 2006, 2009, and 2012.
Customers who purchased
6 x 1-in, Bugle Head, Coarse Thread, Phillips, GrabberGard Gray, 5-lb
6 x 1-1/4-in, Bugle Head, Coarse Thread, Phillips, GrabberGard Gray, 5-l
6 x 1-5/8-in, Bugle Head, Coarse Thread, Phillips, GrabberGard Gray, 5-lb
7 x 2-in, Bugle Head, Coarse Thread, Phillips, GrabberGard Gray, 5-lb