Attaches gypsum board to 20-12 gauge steel. The unique Scavenger® head design helps reduce paper burrs, creating a smooth professional finish.
Head Type: Scavenger®
Recess Type: #2 Phillips
Thread Type: Single lead
Coating: Clear zinc
Use a standard screw gun with a depth-sensitive nose piece. Suggested screw gun specification for optimal performance - 4 amps minimum and RPM range of 0 to 4,000.
- The Scavenger® head is fully seated when the head is flush with the work surface.
- Overdriving my result in fastener failure or strip out.
- The fastener must penetrate beyond the metal three full thread pitches.
All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. The fasteners comply with ASTM C954, as referenced in ICCES report ER-5280, are approved for use in structures governed by the International Building Code 2006, 2009, 2012, International Residential Building Code 2006, 2009, and 2012.
Customers who purchased
6 x 1-5/8-in, SCAVENGER® Head, Drill Point, Clear Zinc, 5-lb
7 x 2-1/4-in Trim Head, Drill Point, Phosphate, Bulk
LEVELLINE® FLEXIBLE CORNER
6 x 1-in, SCAVENGER® Head, Drill Point, Clear Zinc, 5-lb